Tackle & Tools

Designed with the catch-and release-angler in mind, the Frabill® Conservation Series Flat-Bottom Landing Net is a knotless net that reduces injury to fish that other, less quality nets can sometimes cause. Net material is 1" mesh: clear rubber. Other features include a fish-friendly flat bottom and MeshGard hoop that protects netting and extends the life of the net. (MeshGard not available on clear rubber net.) A Pow'R Lok Yoke System with stainless steel hardware allows...

The J-Pro2 is upgraded with enhanced foam padding and acrylic sleeves to better protect the kayak. Fits most sit-inside and sit-on-top kayaks. This mid-priced carrier features a silver finish with multiple layers of corrosion resistant coating and universal fit hardware. Includes Lifetime Limited Warranty.

Model Number LB Test Line Diameter Equivalent Mono Diameter Yards per Spool Line Color Price 5-150-G 5 0.10mm 1 LB 150 Moss Green $17.49 8-150-G 8 .005" 1 LB 150 Moss Green $17.49 10-150-G 10 .006" 2 LB 150 Moss Green $17.49 15-150-G 15 .008" 4 LB 150 Moss Green $17.49 20-300-G 20 .009" 6 LB 300 Moss Green $30.99 30-300-G 30 .011" 8 LB 300 Moss Green $30.99 40-300-G 40 .012" 10 LB 300 Moss Green $30.99 50-300-G 50 .014" 12 LB 300 Moss Green $30.99 65-300-G 65 .016" 16 LB 300 Moss Green $36.99...

$2 OFF! Rapala's Fish Gripper is the perfect fish landing tool for fishermen of all kinds. The unique jaw design holds the lip of the fish without harming the fish and the wrist lanyard always keeps it close at hand. Another great feature of the Fish Gripper is that it floats when dropped into the water!

Unlike any other cart in the paddle sports arena today, the C-TUG continues to amaze sports enthusiast with its rugged appeal, incredible strength and satisfying good looks. Built to last, the C-TUG is made of non-corroding engineering polymers, with stainless steel reinforced axles. This cart is designed for all terrains to get you paddling in places you never dreamed of. The C-TUG requires no tools and assembles in seconds. The C-TUG also dismantles in seconds, allowing you to stow it in...

The DownLoader™ is Malone's premium J-Style carrier with features for low clearance, ease of loading and universal fit for most load bars. These carriers also include corrosion proof frames, molded strap bales, replaceable base pads, replaceable upper sleeves and a new fold-down release design for 2020. Universal mounting system fits a large cross section of aftermarket load bars (round, square and oval) as well as most factory systems. Includes two lengths of mounting bolts to achieve the...

Malone Heavy-Duty Load StrapsHeavy-duty cam style buckle straps have successfully passed our most extreme tests for strength and reliability. Made from 1" wide, 1200 LB. UV resistant polypropylene webbing.  ...

Forget the hassle of dragging your kayak across the parking lot. Native Watercraft's Sidekick comes ready to mount to make your kayak easy to transport to and from the water. Optional upgrade that fits ALL Propel Models except the LT and Manta Ray. NOTE: Due to high customer demand and limited supply, the Sidekick is a non-returnable item for 2022. Store credit may be issued on a case-by-case basis.

Leverage Landing Net® are great for kayaks, small jon boats or canoes. Your choice of either size: 12'' x 20'' Hoop (LLN122047) 20'' x 21'' Hoop (LLN202148)

With its Track Mounted LockNLoad™ Mounting System, YakAttack's universal design can accommodate just about any type rod and reel, all for a great price. With three modes -locked, adjustment, removal - this rod holder is a must-have for any angler.

In Stock! Limited Quantities. Email to Order. The original hard-sided kayak crate just got better. A lot better. Introducing the completely redesigned BlackPak Pro. The result of intense collaboration and more than a year of R&D and design, the BlackPak Pro is fully riggable and boasts a hinged lid, 25% weight reduction, and best-in-class functionality. Enhancements include many things you might have expected, as well as some true-to-the-brand features that no one saw coming. Comes in...

Calcutta's aluminum straight jaw pliers with built-in cutters are perfect for boat or kayak. Includes sheath and lanyard.

$10 OFF! Finally, a fish measurement board specialized for anglers in tight spaces. With limited space in the cockpit of a kayak, on the deck of a paddleboard, or in a gear bag when wade or bank fishing, The Fish Stik gives you back your fishing space by folding down and storing easily. The new design addresses the biggest problems with old-school measuring boards, poles, and tapes: it folds down to save space and it floats. Stop compromising your space and your measurements. Get back to...

Using the YakGear Rod Floats, your rod will stay on top of the water instead of sinking to the bottom if it falls out of your hands or your boat, saving you money and getting you right back to casting. Whether fishing with children or for peace of mind, this is a must-have product. Installs in seconds, just slip onto your fishing pole, attach the Velcro straps, and you’re done! Comes with 3 colors: Yellow, Orange, and Blue. Each float is roughly 8 inches long.  ...

MegaWing™ kayak carrier has enhanced strength to transport heavy sit-on-top fishing kayaks. These reinforced V-style carries fit a variety of hull shapes and sizes. Comes with 15' load straps, universal hardware and Lifetime Limited Warranty.

Easily mounts to Groove Tracks and includes hardware. Perfect place to store fishing tools, such as pliers, snips, de-hookers. Fits most Native kayak models. Includes hand-sewn tool holder, two thumb screws, and two slider slugsHand-sewn in Fletcher, NC USA.

Seat Tool & Tackle Organizer provides four slots for tool storage (tools not included), with two pockets for tackle storage boxes (boxes not included). Also, it contains D-Rings for tethering tools. Provides easy to access in high or low seat positions. Attaches to the bottom of the seat frame with hook and loop strips.  NOTE: Does not fit on Titan and Ultimate FX Propel seating. 

Tournament quality caddy that holds essential tools and tackle. This pouch attaches using the Groove Track system and overhangs into the kayak for quick & easy access. Fits the Slayer Propel 10, Slayer Propel 13, Manta Ray Propel Angler 12, Slayer 12, Slayer 14. 5 models. Tools and tackle box not included.

Used for mounting an electric motor to Native Watercraft Propel kayaks. The Motor Mount is available in Basic Mount, and 14″ and 20" Thwart Mount. 14″ Thwart Mount (Back Ordered): For use with Slayer Propel 10, Ultimate FX Propel 13, Manta Ray Propel 12, Slayer Propel 12 LT, and Titan series.  20″ Thwart Mount: For use with the Slayer Propel 13. NOW ON SALE! ...

No more ball mounts, no more slipping or rotating in the track. With the LockNLoad™ mounting system this is the cleanest and most secure mounting solution!

The PanFish Portrait Pro™ is an updated version of the original that features a more durable construction, LockNLoad base, and new YakAttack camera ball system. The LockNLoad base offers complete 360° rotation while maintaining complete gear security. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible - single...

Let's face it, stuff sometimes happens on the water. Like busting a prop. That's why Native Watercraft's "Easy Cruz Replacement Propeller" is a 'must have" piece of gear to get you back fishing quickly and easily.  Currently Out of Stock. Coming Soon in Early 2021!

Another exciting new product - Native Watercraft Springblade Rudder Accessory! The new rudder is compatible with the Slayer Propel 10, Slayer Propel 13, Titan Propel 10.5, Titan Propel 12, Titan Propel 13.5, Slayer Propel Max 10 and Slayer Propel Max 12.5. Here are some of the benefits of the Springblade Rudder: Easier to turn handleQuicker turningGreat trackingSteer the boat in the stowed or deployed position, which helps with steering in shallow waterTightened turning radiusEasy...

This crate system has 10 stations for rod holders that can be mounted at various angles for a total of 50 possible positions. The top rails are designed to accept MightyBolt accessories, eliminating the need for GearTracs or Mighty Mounts to attach your VISICarbon Pro, PanFish, or other MightyBolt compatible accessories. Includes lid and three tube rod holders. (Assembly Required) NOTE: Closeout item, no returns or refunds. Supplies Limited. ...

MTI Helios Inflatable Lightweight and cool to wear. Inflates in seconds after pulling the ripcord tab, providing 26 lbs of instant flotation. Indicator window allows you to confirm readiness. Backup oral inflation tube, reflective trim, and tethered whistle for added safety. Color:    Dark Gray/Gray USCG:    Type III Minimum Buoyancy:    26 lb 2 oz Sizes:     Adult Universal (30"-52") User Weight:     More...

Striper-4™ safely carries up to four large spinning rod & reels and conveniently attaches to most aftermarket and factory load bars (round, square and oval). Built with corrosion resistant components and mounting hardware. Key locking carriers provide security to stop 'opportunity' theft while safely transporting expensive rod & reel setups. Comes with assembly tools, keys, instructions and a Lifetime Limited Warranty. Some assembly required.

The Tight Line Anchor Trolley System works simply and works great. It's especially convenient in currents and windy waters, adjusting the rope allows you to change the direction you are facing without needing to reposition your anchor. Reflective rope allows the paddler to see the anchor angle when night fishing.

Keep your Propel Pedal Drive operating in peak condition by cleaning and periodically adding lubricant to the crank. This kit includes the tools and lubricant used in the general maintenance needed to ensure optimal performance for the lifetime of your Propel system. Includes 3.5 oz. of Teflon lubricant, pump with extended nozzle and 3/16″ allen key to access fill port.

The First Class Seat Pack contours perfectly to the seat frame offering multiple easily accessible storage options. The front has two mesh pockets, the vertical zipper along the side makes it easy to get inside the main pocket without turning around, and the large back pocket is an excellent location for a hydration bladder or other items you want to keep on hand.

Zero-draft in the shallows for your Propel has never been easier. Simply press down on the indexer to line up the prop and raise the unit up and out of the way. This Propel Indexer will work with all Propel Pedal Drive props.Currently Out of Stock. Coming Soon in Early 2021!

One of the basic safety principles of kayak fishing is to make sure you are seen by other boaters while on the water. GearTrac™ Ready YakAttack’s VISIFlag™ makes sure other boaters seen you.

The Double Up Bar allows you to assemble 2 x C-TUGs together, spreading the load and allowing you to carry heavier kayaks or boats. The bar is a specific length to keep the wheels close together allowing the double cart to be turned easily. Once loaded and balanced no lifting is required, all you have to do is pull it. Works with the standard C-TUG & C-TUG SandTrakz. Fits any C-TUG old or new

Deluxe Kayak Kit includes everything needed to safely and affordably transport one kayak. The 18" blocks feature a universal cut-out profile that fits round, square and oval load bars. Includes two 15' load straps and safety tie-downs. Made in the USA with the finest EVA closed cell foam.

Ever need both hands free to reel in a fish, take a photo, or get into your gear or just stop for some water? This simple Deck Mounted Paddle Holder allows you to secure your paddle out of the way without worrying about it floating away. It easily attaches to any kind of kayak.

The little brother to the Rod Holder II, it is designed to hold fishing rods with spinning, bait caster, or fly reels.The Rod Holder R is a light-duty rod holder suitable for fresh water and inshore fishing, not trolling for large fish. It will fit into any RAILBLAZA mounting port. The stretchable strap at the front of the holder will wrap around the top for bait caster and fly reels and round the bottom for spinning reels, keeping your rod and reel safe. Molded in rugged fiberglass...

No more ball mounts, no more slipping or rotating in the track. Designed to replace the factory base on Lowrance fishfinders, the Lowrance Fishfinder Mount is a simple, clean, and highly effective solution for mounting your fishfinder. Attaches to track using our new LockNLoad™ mounting system for maximum versatility. This mount fits the popular Lowrance Elite, Hook, and Elite Ti models of fishfinders. The LockNLoad track mount is compatible with YakAttack MightyMount’s, GearTrac, and most...

Anchor your kayak, canoe, or small boat worry free with the YakGear 3.3-lb (1.5kg) Grapnel Anchor Kit. This 3.3-lb (1.5 kg) galvanized steel anchor features four 6-inch tines that fold out of the way while stored for space maximization and release when ready for use. The heavy head design of the anchor creates less wait time until the anchor is fully submerged into the anchoring surface on deeper and faster moving water. 30 feet of 3/16 inch black nylon anchor rope and a storage ditty bag....

Standard Canoe Kit is a great way to keep the budget down and transport a canoe. The 6" gunnel style non-skid blocks feature a universal cut-out profile that fits round, square and oval load bars. Includes two 15' load straps and two safety tie-downs. Made in the USA with EVA closed cell foam.

Standard Kayak Kit is Malone's most affordable transport one kayak. The 12" blocks feature a universal cut-out profile that fits round, square and oval load bars. Includes two 15' load straps and two safety tie-downs. Made in the USA with the finest EVA closed cell foam

Cam-Lok Paddle Holders are ingeniously designed to be versatile and easily repositioned. They can be used in any Groove Trak and allow you to keep your paddle lengthwise or across your boat. The internal rubber securely grips and cushions without scratching or generating noise. So easy to use, they make stowing and retrieving paddles practically effortless. Also great for holding rod ends!

Includes 2020 pedals and crank arms that come standard on the 701 series Propel Pedal Drive. Retrofittable to all 301 series or newer Propel Pedal Drive units. NOTE: This kit does not include a crank arm puller. The crank arm puller can be purchased on numerous online stores.Currently Out of Stock. Coming Soon in Early 2021!

The 701 series pedal drive includes several upgrades, including streamed line pedal cranks, super grip pedals with hex traction pins, and a metal weed guard integrated into the lower cartridge of the drive. The 701 Series will be included with all 2020 Native Watercraft Propel driven kayaks. This is the Propel Pedal Drive system that makes Native Watercraft kayaks so singularly perfect for fishing.  Tough & Proven Marine-Grade Anodized Aluminum- Built to last since 2008!Aggressive,...

Whether you want to replace your worn out handles or install a couple of extras carrying points, the YakGear Handle Kit provides the answer. Constructed from marine-grade rubber with double-thick nylon straps for durability, this set of handles also features a contour grip for comfortable use and practicality during transportation. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone...

These scissors will cut the smallest to the largest diameter braid. Oversized handles make handling easy.  Both 5" o Heavy Duty 5" Stainless Steel Scissors, with Twin Serrated Blades that Cut Braided Line. Rubberized Finger Holes for Secure, Non-Slip Performance. Ideal for either Freshwater and Saltwater. 

The Slayer 12/Slayer 13 Propel Hatch covers the bow storage area, shedding spray and rain. Secured in place by the crosspattern bungee system. It is made of rigid plastic that will not sag.

Catch the big fish while anchored with the little anchor kit with the complete Yak Gear 1.5lb (.7kg) Grapnel Anchor Kit. This 1.5lb (.7 kg) galvanized steel anchor features four 6-inch tines that fold out of the way while stored for space maximization and release when ready for use. While it may seem too small, the use of a 1.5lb anchor is a more than adequate weight for kayaks and canoes in rivers, lakes, and slower moving water. “Rock Rig” and “Add a Rope” capabilities are included in the...

Secure your kayak fishing gear without bulky leashes or floats using the YakAttack Track Mount Retractor. This super versatile unit combines the innovation you've come to expect from YakAttack and genuine T-Reign retracting mechanism, 36" Kevlar cord, and a removable 4" tether. Designed for track mounting, this kit comes complete with everything you need, and is compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and...

Includes 2020 pedals that come standard on the 701 series Propel Pedal Drive. Retrofittable to all 301 series or newer Propel Pedal Drive Units.